A Nelson Matter Dresser Makeover

I picked up this dresser and mirror several months ago at an auction.

As you can see, it was a mess. The lovely crackled finish would have been nice to leave as is, excerpt there were places on the top, front and sides that had huge areas of damage. The top had cup rings, the front looked like a tire tread over the paint, and the side had business cards stuck to the surface!

After inspecting the inside when I got it home, I discovered this medallion in a drawer.

It belongs to The Nelson Matter Furniture Company, which had been established in 1844 in Grand Rapids, Michigan. After a little research online, I discovered this company went out of business in about 1910. So, you can see that this is an old piece of furniture! And that would explain its sold wood, dovetailed construction, as well as the state of the mirror, which is quite cloudy. However, it certainly doesn't deter from the beauty of the piece, but gives it more character in my opinion. I loved the bail pulls, even though it was missing one. I loved the keyholes, the swiveling mirror and gorgeous legs. I loved it at first sight, and waited through 4 hours of bidding to get it!

After giving it a quick clean-up with mineral spirits, I decided to paint this with Annie Sloan Chalk Paint. I used Graphite with dark wax, as well as Paris Grey with clear wax (the two-tone look is so hot right now). And while I had hoped to find a drawer pull to match the existing ones, my search came up empty-handed. So, I ordered 6 new solid brass rosette bail pulls, that were a close match.

And here she is...

I love painting dressers - especially old ones. They always please me to no end with their dramatic transformations! I hope this beauty finds a well-deserved new home!

The great room's getting a new look - in progress

We've been in our Virginia home for going on three years now. And in that time, I've done nothing to decorate my great room. All of the furniture in it came from our previous Pennsylvania home, during a time when my tastes were very dark.

We had a collection of black wood, brown leather and chocolate upholstery in this room. And since moving here, I've wanted to ditch it all and start fresh. Of course, two things stood in my way: cost to replace it all, and vision. I just didn't know what I wanted to do in that room. Maybe its the size. It's a very large two-story room, with huge walls that feel like ginormous blank canvases!

I still don't know what to do with the walls, but recently I've made some progress on changing the look - brightening it up and adding some color!

I purchased a new white sectional! I know what you are thinking - white??? With a little kid and dog? Believe me, I will be vigilant about everyone eating in the kitchen and keeping food, drinks and other stain-inducing activities out of the great room! Last night we watched a movie, and I made Saxon eat popcorn on the floor! At any rate, I love it for a couple of reasons. It creates a more intimate seating arrangement. Before, we had a couch against this wall, and a loveseat against the side wall. This room was too big for an against-the-wall arrangement - but my hubs has a thing for wanting the furniture against the walls. Now, we are forced to sit closer, and the two little chairs against the wall can be pulled in if necessary.

I also love the white sectional because it allows the orange colors in the rug and pillows to pop! I love bright colors and will be bringing more of it into this room with smaller decorative items. The yellow dog looks pretty too, doesn't she?

This big painting has to go, too. It was fine when it hung over the love seat, but now it dwarfs the new console table. So, I'll be taking it down and hanging these three mirrors above. Love them - they're made from reclaimed barn wood!

I hope to enlist the help of hubby this weekend. Currently I'm a bit incapacitated with this!

The sectional came with a super large ottoman! I moved it against the wall for extra seating. I plan to put some more colorful pillows on it. I'm even considering buying another to put on the other side of the entertainment unit. Which brings me to the eye-sore in the room...

I'm considering what to do with the entertainment unit. It's entirely too dark for this room. But, I do like the shelving that allows me to display my collection of pottery. At first I thought I might paint it. But, now I am thinking I will sell it, and get a taller media cabinet - and have the TV hung over it on the wall. And I'd like to have floating shelves hung over each ottoman. Here's my vision...

I quickly created this mock-up in Olio Board. If you haven't checked out Olio Board yet, you must! It's a cool site where you can upload your own photos, or search thousands of brands of furniture and home decor, to create your own rooms.

And for right now, the horse canvas I created in this past month's craft club (here's the tutorial on how to make your own canvas from a photo) is living on the fireplace mantel.

The room is headed in the right direction - but still feels like it needs a bunch of work to get it right. We'll keep plugging away at it, and when I make additions or changes, I'll be sure to update the blog!

Do-It-Yourself Framed Canvas Project - From an Ordinary Photo

Last night was our monthly craft club meeting. Our lovely neighbor Tara hosted, and she taught us how to turn a regular photo into a framed work of art! As a professional photographer, Tara has a houseful of amazing photos that I thought were printed on canvas. One hanging in her hallway is stunning, and inspired this month's meeting!

I know its hard to see in photos, but when you walk up close and touch the surface, they have the delicate texture you find on a canvas. Last night, she let us all in on her secret. And now you can craft your own canvas look-alikes, too (for a fraction of the price I might add)!

Here's what you will need:
-A standard printed photo of any size (a great place to get prints at really reasonable prices is Costco)
-A frame
-A piece of foam board (you can buy this by the sheet at any craft store with a framing section)
-Mod Podge and foam brushes for applying
-A straight edge, cutting board and exacto knife (if you need to cut down your photo, or foam board)
-Sponges
-Rolling pin thingy
-Black and gold paint (optional)

2) First, find a photo you like and get it printed in the size you desire. 

Ever since a trip to Luckett's 2 years ago, I have wanted a huge piece of art with a white horse on it. They had a gorgeous framed arabian horse, and wow - I stared at this beauty. But the price tag was insane! I haven't forgotten that horse, so when this opportunity to make my own big piece of art came along, I hopped on a stock photography website to find my own white horse. I used Shutterstock. I was able to purchased and immediately download a "Super" high-resolution sized image (28.6" x 19.0" at 300 DPI) for only $19!! Once I downloaded the image from Shutterstock, I then uploaded it to the Costco photo center website. There I opted to printer a poster-sized photo in 30" x 20." This only cost $8.99! And it was ready in just a few hours!

3) Find a frame. Ideally, you want your frame to be the same size as your print. But, if your photo is bigger than the frame, you can always cut it down. Simply use a straight-edge or ruler, cutting board and exacto knife to get the size you need. Cut your foam board to the same size as your print.

Here's a tip - custom frames can be outrageously expensive (Trust me - the one I wanted for this project from Michael's was $400!) So, there's a few things you can do, buy a plain frame and paint it, which is what I did. Or, go to a place like HomeGoods, and score a clearance mirror and just remove the mirrored part. Instant frame!)

4) Once your print and foam board are cut to the correct size, gather your Mod Podge (we all used Matte, but Glossy is also available), a foam brush, and the rolling pin thingy. Liberally apply mod podge all over the foam board, creating a smooth layer. Cover the entire piece and make sure to get the edges. Here's Tara demonstrating!

5) Next, place your print over the foam board, and begin smoothing it out with the rolling pin thingy. Try to remove any and all air bubbles. Move in all directions. Once you have it smoothly in place, allow it to dry. This might take about 10 minutes - it dries rather quickly. At this point, we stopped to enjoy Tara's delicacies, which included homemade candied walnuts (to die for)!!

Isn't this a great photo? Another one of Tara's awesome shots!

6) After it dries, here comes the fun part...

Spread another liberal layer of mod podge right over the print. Work quickly, so it doesn't dry, because you immediately want to "stipple" the mod podge with a sponge. We used everyday dish sponges, that were split down the middle to reveal the bumpy texture inside. You can used other sponges, too - choose the size of the holes you prefer. Some sponges create larger stipple, while others create a smaller, finer stipple. We all opted for these dish sponges, which made larger stipple.

 Quickly dab the sponge on the wet mod podge. Dab the whole print, until you see the texture everywhere.

You dab fast, hence the speedy hand photo here!

When you are done, your entire print will look like this. Don't worry, the mod podge dries clear, and will only leave behind the texture - giving it the canvas look! We waited for it to dry, and then went back and did a second layer of the stippling.

Here's the white stippled mod podge on my horse.

After they dry, you simply insert your piece into the frame!

Here you can see the texture well in the top-left corner! Liza made this work of art!

She also made this one of her wedding bands on the beach - again you can really see the texture on the shaded areas in the bottom right.

Here's Tara's - isn't the frame awesome! It was originally a mirror!

Here's two Kelly did!

And Kim's shot from Hawaii!

Now that we've told you how this is done, let's talk about a few "special techniques," for aging your photos. Kristi worked on these two dog images as a special memento for her parents who just lost their beloved pets. Since her original photos were a bit blurry, she wanted to make them look old and "grainy," like a lot of old photos used to be back in the day. For the Photoshop users out there, you would called this adding "noise." To achieve this noise, Kristi added a tiny bit of black craft paint to her mod podge, stirred well, and then stippled. You can really see it well on the right-hand shot.  They turned out great!

In this photo Tara showed us how to age a piece two ways. She watered down a gold craft paint, and sponged it all over the image. You know how photos tend to turn yellow over the years - she made it happen instantaneously! Then she used watered-down black craft paint to create a silhouette around the edges. So cool!

Tara turned her kitchen into a serious studio for us with long tables covered in paper!

Here she is demonstrating the aging techniques!

Since my horse piece was so big, I needed help to get it smoothed out quickly and remove the air bubbles before the mod dried!

I LOVE how it turned out. I know its really hard to see the texture in my photos, especially on the white areas - but trust me, its there, and it feels so cool!

Remember how I said you could paint your frame? That's what I did here...finding a cool 20x30 frame or mirror was impossible. I could only find a plain black one. So, I dry-brushed a couple of Annie Sloan Chalk Paint colors over the black, and it changed the whole look. I can't wait to hang this in my home!

Thank you to Tara for all of her hospitality, and for teaching us how to make our own custom-canvases! I know I will be doing this again and again!

The basement renovation is nearly complete!

The last two months have been consumed with all things "basement!" Between dealing with contractors and an overseas husband worried about his man-cave, this basement might have given me a couple of gray hairs! (which no one will ever see thanks to my hair stylist)

Hubby left for Africa about a week into construction, and since then, it's been a very bumpy road getting to completion. As you all know if you've ever tackled a big project, there's always things that just don't go correctly. Without getting into all those pain in the ass details, I thought I'd skip right to the fun stuff - photos!!

Here's a visual tour of what's been going on downstairs...

These are a few items I've picked up to hang here and there. Plus this cool vintage locker-style cabinet that I gave to hubby as an early Father's Day gift. Since we're going for an industrial vibe, it's all about the metal, wire and old down there! I'm having so much fun searching for decor!

The power room is one of my favorite parts of the basement because of the copper sink and the light fixtures.

 They are the large Edison wall sconces from Restoration Hardware. I picked up the mirror at a thrift store for a couple of bucks and painted it with Annie Sloan Chalk Paint in Graphite, and several coats of dark wax. There's a touch of brass colored wax around the edges too.

Wow, I didn't realize how dirty this sink is! Darn contractors washing their hands in our new sink! Grrr...

How cool is this piece of burled wood - now being used as a trash can!

This little front room will be used for playing video games primarily. The walls and carpet are a light grey. And the doors, beam, support pole, as well as the panel door were plainted black.

I will be painting the railing in ASCP's Graphite. I just started taping it off today.

All of the appliances are installed behind the bar. The stone counter-top color is called Lyra. Custom cabinets were made and finished in black.

I love this deep bar sink!

This is probably hubby's favorite part of the bar - the keg-o-rator!  

I like the wire pendants hanging over the bar, and on the side wall.

The bar is wrapped in corrugated metal. Applying this is easy to do - just buy sheets from Lowe's or Home Depot (they're very thin). Tack it to your wood frame, and then finish it off with metal strips that are screwed into the wood frame. Just be careful, this stuff is really sharp when its cut!

This wall will be getting a ledge under the 3 pendants, where guests can sit on bar stools and wait for their turn at the pool table! Or try their luck at the slot machine!

The back entrance was tiled, and the doors were painted black.

Here's the view as you walk in the back door. The beams and poles were left exposed and painted black. The floor will be completed next week, with a wood flooring that looks like weathered barn wood.

Here's a clock I picked up at HomeGoods that we have to hang. It's a rusty metal - love it!

 Some Restoration Hardware pillows moved from the living room down to the basement.

And here's evidence that the basement is already functioning as it was intended! hee hee We may not have furniture yet, but we have beer!